There are several reasons why the woodworking engraving machine is blurred and rough.

Shun carving woodworking machine manufacturers, teach a lot of customers to buy machine carving skills and methods, in general, woodworking engraving machine when carving wood and other materials, often for a variety of reasons, resulting in engraving materials The change is fuzzy and rough. In order to avoid this situation, the Shunjiao woodworking machine manufacturers offer the following suggestions to many customers:
   First, the machine work surface should be kept clean and clean. After the woodworking machine is finished, the remaining materials should be cleaned up in time. This is also a good maintenance for the machine itself. We should accumulate more experience in our work in order to better master the skills of operating the machine. Especially for customers who need to make three-dimensional furniture and embossing, this kind of processing method has higher requirements for the precision of woodworking engraving machine. Once the machine has any problems, the engraving effect will be blurred, confusing and rough.
   Secondly, before processing, we should check the tool used for wear and damage. If the damage of the engraving tool is serious, the engraved material or pattern will be blurred and unclear. When the tool is damaged by one-third, we need to replace the new tool in time.
   The third point, we must focus on checking whether there is a problem with the engraving path we have made. This has a lot to do with the actual work experience we have accumulated in peacetime. What kind of graphics do we choose? There is also the depth of the engraving depth, the gap of the path, and so on.
   Finally, before starting the machine engraving, check whether there are any debris, wood chips, etc. in the machine's overall rack drive; whether the spindle is moving or not. In the above several cases, this is the reason why the materials carved by the wood engraving machine are blurred and rough.

Analysis of the use of woodworking engraving machine

    The woodworking engraving machine is used for the processing of wood. Now it can be engraved on crystal, copper, aluminum and other materials, and the objects can be carved beautifully. The engraving machine used is fully automated by the computer. It is set on the computer and directly allows the machine to complete the computer command, which can save some engraving time. In the engraving industry, the use of engraving machines will increase work efficiency.
In the use of engraving machine, it should be noted that before turning on the device, you should check the engraving machine to see if the power socket is connected properly. Otherwise, the socket cannot be turned on without the current. If the device is found to be unresponsive after the device is turned on, it is likely that there is a problem with the power socket of the device. Checking the device and then turning it on is correct.
    When engraving, the engraving speed cannot be accelerated, and if the speed is too fast, the cutter of the engraving machine is broken. To start the engraving, it may be because the operation is not very skilled, you can temporarily slow down the point speed, familiarize the work, and then adjust the speed back to normal speed. When the tool is automatically set, it is also necessary to note that the block is insulated from the aluminum countertop of the engraving machine.
    After the operation of the engraving machine is completed, it is necessary to clean the engraving machine, clean the dust on the table top and the transmission system, and regularly add lubricating oil to the three-axis of the conventional system. Dust masks should be worn for both operation and cleaning to prevent the dust from being inhaled into the body. If you want to use the engraving machine better, consult the woodworking engraving machine manufacturer for more usage.