The woodworking engraving machine is used for the processing of wood. Now it can be engraved on crystal, copper, aluminum and other materials, and the objects can be carved beautifully. The engraving machine used is fully automated by the computer. It is set on the computer and directly allows the machine to complete the computer command, which can save some engraving time. In the engraving industry, the use of engraving machines will increase work efficiency.
In the use of engraving machine, it should be noted that before turning on the device, you should check the engraving machine to see if the power socket is connected properly. Otherwise, the socket cannot be turned on without the current. If the device is found to be unresponsive after the device is turned on, it is likely that there is a problem with the power socket of the device. Checking the device and then turning it on is correct.
When engraving, the engraving speed cannot be accelerated, and if the speed is too fast, the cutter of the engraving machine is broken. To start the engraving, it may be because the operation is not very skilled, you can temporarily slow down the point speed, familiarize the work, and then adjust the speed back to normal speed. When the tool is automatically set, it is also necessary to note that the block is insulated from the aluminum countertop of the engraving machine.
After the operation of the engraving machine is completed, it is necessary to clean the engraving machine, clean the dust on the table top and the transmission system, and regularly add lubricating oil to the three-axis of the conventional system. Dust masks should be worn for both operation and cleaning to prevent the dust from being inhaled into the body. If you want to use the engraving machine better, consult the woodworking engraving machine manufacturer for more usage.
