The origin of the advertising engraving machine is divided into the machine origin and the workpiece origin.
1. The origin of the mechanical engraving machine: The origin of the advertising engraving machine is simply the limit position of the machine X, Y and Z. In detail, the advertising engraving machine is a mechanical unit controlled by the numerical control system, the system itself. Only know the current position relative to the previous position, you need to select a reference point, so that any position on the machine has a fixed coordinate as a parameter, this reference point is the mechanical origin
2. The origin of the workpiece of the advertising engraving machine: the origin of the workpiece of the advertising engraving machine refers to the origin of the workpiece coordinate, which is the origin determined by programming the workpiece size.
What is the difference between the mechanical origin of the advertising engraving machine and the origin of the workpiece?
1. There is only one mechanical origin of the advertising engraving machine; there are multiple origins of the workpiece of the advertising engraving machine.
2, the mechanical origin of the advertising engraving machine can not be set by itself; the origin of the workpiece of the advertising engraving machine can be set at any position of the machine stroke;
How does the advertising engraving machine set the origin? What is the origin?
How to set the "origin" in the origin of the advertising engraving machine refers to the origin of the workpiece.
How to set the origin of the advertising engraving machine?
When we select the “Return to workpiece origin...” option, the tool tip will automatically return to the workpiece origin from the current position, and the tool tip will actively return to the workpiece origin from the current position. Specific zero return method
(1) If the end Z direction coordinate is greater than the starting Z direction coordinate, the Z axis is fed independently to the Z axis end orientation, and then the X and Y axes are linked to reach the intended point.
(2) If the end Z direction coordinate is smaller than the starting Z direction coordinate, the X and Y axes are first linked to the intention point X, Y coordinate, and then the z axis is independently fed to the z axis end coordinate.
Since the Z coordinate at the end is often in the machining appearance of the workpiece, in order to prevent the tool tip from returning to the workpiece zero point and then hurting the workpiece surface or the tool tip, in fact, the Z axis is not returned to zero, but an offset value above the zero point. This value is set by the "Retraction point" in the machining parameters of the "System Parameter Window".
How to set the advertising engraving machine back to the mechanical origin?
If you have a limit, you can return to the machine's origin, or you will bump into the machine. In the Weihong system, point the operation point back to the mechanical origin.
