In order to fully utilize TIMKEN's imported bearings and maintain their proper performance for a long time, regular maintenance (regular inspection) must be done.
Through proper periodic inspections, early detection of failures and prevention of accidents are important to improve productivity and economy.
1, cleaning
When removing the TIMKEN imported bearings, first take a look at the appearance with photography. Also, verify the amount of lubricant remaining and sample the lubricant before cleaning the bearings.
a. The cleaning of the bearing is carried out by rough washing and fine washing, and a metal mesh frame can be placed on the bottom of the used container.
b. When rough washing, remove the grease or adhesive with a brush or the like in the oil. At this time, if the bearing is rotated in the oil, be careful that the rolling surface will be damaged by foreign matter or the like.
c. When washing finely, slowly rotate the bearing in the oil and carry out it carefully.
The cleaning agent generally used is a neutral non-aqueous diesel oil or kerosene, and a warm alkali liquid or the like is sometimes used as needed. Regardless of which cleaning agent is used, it is often filtered and kept clean.
Immediately after cleaning, apply anti-rust oil or anti-rust grease to the bearing.
2, inspection and judgment
In order to judge whether the removed TIMKEN bearings can be reused, it is necessary to check the dimensional accuracy, rotation accuracy, internal clearance and mating surfaces, raceways, cages and seals.
Regarding the inspection result, it can be judged by a person who is using a conventional bearing or a proficient bearing.
For more information and purchase please visit: https://www.supplyforever.com
