How to choose the attention problem in the advertising engraving machine?

1, we must pay attention to the function of the engraving machine, the engraving machine of the engraving machine has high power and low power. When choosing an advertising engraving machine, you need to choose the engraving machine that suits your power according to your needs.

2. When choosing the engraving machine, we must first understand the performance and function of the engraving motor. The engraving head motor of the engraving machine is also very important, because the engraving head motor is generally not covered by the warranty, and the engraving head motor is continuously working for a long time. Therefore, if the engraving head motor is not good, it will affect the use of the engraving machine.

3, the other is the adjustable speed range of the engraving head motor, the general speed adjustable range is several thousand to 30,000 revolutions per minute, if the speed is not adjustable or the speed adjustable range is small, then the application range of the engraving machine is It is very limited because different materials must be rotated with different engraving head speeds.

4. When the high-power engraving machine is working, the body must be precise and stable. Therefore, the long-term high-power engraving should use the cast body to ensure the machining accuracy and stability.

5, the controller is generally divided into two categories: one type of controller is only to do the drive, and all its calculation work is done by the computer. When the engraving machine is working, the computer is in a waiting state, and the typesetting work cannot be performed. Another type of controller is controlled by a single board machine or a single chip microcomputer. This kind of controller is actually a computer, so as long as the engraving machine starts working, the computer can immediately perform other typesetting work, especially when engraving for a long time. The advantages are particularly obvious.

6, screw and guide rail are also an important part of the engraving machine, good screw and guide rail is the guarantee of precision and performance when the engraving machine is used for a long time.

After talking about how to choose an advertising engraving machine, how do we maintain the advertising engraving machine?

1. The continuous operation time of the advertising engraving machine is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high.

2. The advertising engraving machine should be cleaned every time the machine is used. It is necessary to clean the dust on the platform and the transmission system, and regularly lubricate the transmission system (X.Y.Z three-axis).

3. If the advertising engraving machine is not used for a long time, it should be refueled regularly (weekly) to ensure the flexibility of the transmission system.

4. The advertising engraving machine cleans the dust inside the electrical box regularly (according to the use) and checks whether the screw of the terminal is loose to ensure the safe and reliable use of the circuit.

5. The advertising engraving machine regularly checks (depending on the use) whether the screws of the various parts of the machine are loose.